| | PowerVision: the highperformance
general-purpose
floodlight for sports, general areas
and faç ade illumination.This
compact unit distributes a
well-controlled, low-glare, wide,
medium or narrow beam, evenly,
accurately and efficiently. Excellent
results with the integrallydeveloped,
double-ended, 2000W
metal halide lamp, and also with
standard 1000W metal halide or
high-pressure sodium lamps.
Rugged all-weather construction
designed for easy aiming, simple
cleaning and speedy servicing.
Classifications
IP55
Class I
Complies with IEC 598
Main applications
- Industrial areas
- Sports facilities
- Car parks
- Architecture
Features
• Integrated system of optics,
gear and transverse MHN/ DTD
2000W lamp in a single
housing, achieving high beam
efficiency, and a well-controlled
beam. Also excellent with SONT
or HPI-T 1000W lamps.
• Built-in skirt in reflector
assembly minimises spill light
and glare.
• Suitable as standard for downor
up-lighting in 3 beam widths.
• Protractor scale and visors for
pre-aiming.
• High-efficiency, compact size
light source ( MHN-TD 220000
Im, MHD-TD 190000 Im) , with
low weight and small wind area
allows more light per unit area
of masthead frame, or smaller
frames and masts, as well as low
electrical loads.
• With the MHN-TD 2000W
lamp, the pleasing and natural
color rendering ( Ra= 80) and
the comfortable atmosphere
( Tk= 4200K) are well suited for
TV and filming.
• With the new MHD-TD
2000W lamp, the highest
international CTV requirements
( Ra= 90, Tk= 5600K) are met.
• Safety switch to cut off current
when luminaire is opened
( 2000W versions) .
• Wire mesh protection against
large pieces of falling glass
( 2000W versions) .
• With 2000W models, a series
ignitor, mounted in the
aluminium connection box on
the mounting bracket, is
supplied as standard. With
1000W models, a connection
box is available as an option for
adapting to the higher ambient
temperatures of indoor use.
Exclude gear.
Materials and finish
Non-corrosive, high-pressure
diecast aluminium housing and
hinged rear cover; anodised and
brightened, 99.8% pure aluminium
reflector; chemically-toughened
1.6mm glass protected by
stainless steel wire mesh
( 2000W versions) ; 4mm
thermally hardened glass ( 1000W
versions) ; hot-dipped galvanised
steel mounting bracket; blue
mounting caps.
Installation and mounting
Light weight and compact easy to
carry, mount, aim, connect and
re-lamp ( through the hinged rear
cover, without disturbing the
aiming of the floodlight) . 360º C.
Mounting bracket adjustment
with triple aiming facilities at
either side of the housing. Ample
vertical and horizontal adjustment
to allow close-grouped arrays.
Housing dustproof and jetproof;
no internal cleaning required.
Maximum ambient temperature
35º C outdoor; 40º C indoor for
1000W with external connection.
Accessories
Precision aiming device.
External louvre.
Gear
Pre-wired gear trays available
for all lamps; trays can be
delivered in various sizes to
ensure efficient installation, either
internally or in the mast. Gear
boxes to separate order | | |
|
)
