Welcome to

Free Member

XGP 500 Obtivision

Quantity Order: Add to Basket
Request for Quote
Payment Method:Telegraphic Transfer (T/T)

ObstiVision ( XGP 338)
A dedicated maintenance-free
obstacle light for aviation warning
purposes. Light emitting diode
( LED) technology is chosen to be
the light source of this product.
ObstiVision is suitable to be used
as a Low Intensity, Type A
obstacle light according to ICAO
standards.Type B obstacle light
with higher intensity is also
available upon request.
Product Compliance
International Civil Aviation
Organization ( ICAO) standards
and recommended practices -
Aerodromes Annex 14 Volume 1,
3rd edition, July 1999, Chapter 6
Federal Aviation Administration
( FAA) standard
Main application
Telecommunication towers
Tall buildings
Power transmission towers
Extremely long lamp life of
100, 000 hours
Energy savings of up to 95%
Quick pay-back period of 1
year or less
Technical descriptions
Yellow powder painted highpressure
die-cast aluminium
Clear glass cover 5mm thick
Stainless steel plate to support
LED unit
Operating temperature =
-40° C to + 70° C
Wind load at 200 km/ hr of less
than 40 Newton force
Threaded base for 1 inch in
diameter size of pipe ( other size
can be applied with the reducer
or enlarger)
XGP 338
Type Description Ordering Number
XGP388 48Vdc A ObstiVision 48Vdc 9199 186 76132
XGP388 48Vdc AF ObstiVision 48Vdc with flasher 9199 186 76032
XGP388 220-240Vac A ObstiVision 220-240Vac 9199 186 77132
XGP388 220-240Vac AF ObstiVision 220-240Vac with flasher 9199 186 77032
ZGB388 48Vdc T Control box 48Vdc with timer 9199 186 72032
ZGB388 48Vdc P Control box 48Vdc with photo switch 9199 186 72132
ZGB388 220-240Vac T Control box 220-240Vac with timer 9199 186 72232
ZGB388 220-240Vac P Control box 220-240Vac with photo switch 9199 186 72332
ZGP388 TW3 3-way throughwiring junction box 9199 186 71032
ZGP388 TW4 4-way throughwiring junction box 9199 186 71132
ZPP388 Mounting Kit - pipe installation 9199 186 70032
ZVB388 Mounting Kit - building top installation 9199 186 70132
ZWB388 Mounting Kit - wall mounted installation 9199 186 70232
Standard execution in 220 volts, 50 Hz.
Standard type using nominal
operating voltage of 48Vdc or
220-240Vac; 12 Vdc and 24 Vdc
systems are available upon
Terminal block for 2 x 1.5mm2
Power consumption: 5W for
48Vdc version and 7W for 220
240Vac version
Constant current 100mA
Surge protection device
integrated: according to Institute
of Electrical and Electronics
Engineers ( IEEE) requirement
Luminous intensity of greater
than 10 cd for low intensity
type A obstacle light ( low
intensity type B obstacle light is
available upon request and has
luminous intensity of greater
than 32 cd)
Horizontal radiation coverage
Vertical radiation coverage 50°
Color: aviation red, choice of
fixed or flashed light
Installation and mounting
Pipe installation: the standard
luminaire comes with threaded
base ready to be installed
with threaded pipe of 1 inch in
diameter ( other size of pipe
use standard reducer or
To attach ObstiVision with
existing attenna / pipe or wall
mounted installation, the
mounting kit is required.
Control box
Photo switch and sensor
Mounting accessories ( please
check with your local Philips
3-way and 4-way junction box
for through-wiring
Solar cell

Company Contact
Name:Mrs. HENDRY [Sales]
E-mail:Send Message
Instant Messaging:
Y!: verahyeko Y!: verahyeko
Skype: verahyeko
Mobile Number:087775373095
Phone Number:0813-18167793 / 0877-75373095
Fax Number:021-5826881
Address:Perkantoran Tomang Tol Raya
JAKARTA 11510, Jakarta
showing 8 of 16 | Prev : SPECTRUM SPP368 | Next : MVF024 SON-T/ HPI-T....

Want to build your own company website?
Please Click Here!